View UMZ2N_1331550.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMZ2 / UMZ2N / IMZ2A
Transistors
Power management (dual transistors)
EMZ2 / UMZ2N / IMZ2A
Feature 1) Both a 2SA1037AK chip and 2SC2412K chip in a EMT or UMT or SMT package.
External dimensions (Unit : mm)
EMZ2
0.22
(4) (5) (6) (3) (2)
0.13
EMZ2 / UMZ2N
(3) (2) (1)
IMZ2A
(4) (5) (6)
ROHM : EMT6
Tr2 Tr1
Tr2 Tr1
Each lead has same dimensions
(4)
0.65 1.3 0.8 1.1 0.95 0.95 1.9 2.9 0.7 0.65
(4)
(5)
(6)
(3)
(2)
(1)
0.2
(3)
UMZ2N
(2)
0.5
Equivalent circuits
1.2 1.6
(1)
0.5 0.5 1.0 1.6
(6)
1.25
Absolute maximum ratings (Ta = 25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power EMZ2, UMZ2N dissipation IMZ2A Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits Tr1 -60 -50 Tr2 60 50 Unit V V V mA mW C C
0.15
2.1
0.1Min.
0to0.1
-6 7 -150 150 150 (TOTAL) 300 (TOTAL) 150 -55 to +150
1 2
ROHM : UMT6 EIAJ : SC-88
Each lead has same dimensions
IMZ2A
(6)
(4)
1.6 2.8
Package, marking, and packaging specifications
Part No. Package Marking Code Basic ordering unit (pieces) EMZ2 EMT6 Z2 T2R 8000 UMZ2N UMT6 Z2 TR 3000 IMZ2A SMT6 Z2 T108 3000
0.15
0.3to0.6
0to0.1
ROHM : SMT6 EIAJ : SC-74
Each lead has same dimensions
(3)
1 120mW per element must not be exceeded. 2 200mW per element must not be exceeded.
0.3
(5)
(2)
(1)
(1)
Rev.A
2.0
(5)
1/4
EMZ2 / UMZ2N / IMZ2A
Transistors
Electrical characteristics (Ta=25C)
Tr1 (PNP) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. -60 -50 -6 - - - 120 - - Typ. - - - - - - - 140 4 Max. - - - -0.1 -0.1 -0.5 560 - 5 Unit V V V A A V - MHz pF IC = -50A IC = -1mA IE = -50A VCB = -60V VEB = -6V IC/IB = -50mA/-5mA VCE = -6V , IC = -1mA VCE = -12V , IE = 2mA , f = 100MHz VCB = -12V , IE = 0A , f = 1MHz Conditions
Transition frequency of the device.
Tr2 (NPN) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob
Min. 60 50 7 - - - 120 - -
Typ. - - - - - - - 180 2
Max. - - - 0.1 0.1 0.4 560 - 3.5
Unit V V V A A V - MHz pF IC = 50A IC = 1mA IE = 50A VCB = 60V VEB = 7V
Conditions
IC/IB = 50mA/5mA VCE = 6V , IC = 1mA VCE = 12V , IE = -2mA , f = 100MHz VCB = 12V , IE = 0A , f = 1MHz
Transition frequency of the device.
Electrical characteristics curves PNP Tr
-50
COLLECTOR CURRENT : Ic (mA)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
-20 -10 -5 -2 -1 -0.5 -0.2 -0.1
Ta=100C 25C -40C
VCE= -6V
-10
-35.0
Ta=25C
-100
-31.5 -28.0 -24.5
Ta=25C
-8
-80
-6
-21.0 -17.5
-60
-500 -450 -400 -350 -300
-250 -200
-4
-14.0 -10.5
-40
-150 -100
-2
-7.0 -3.5A
-20
-50A
IB=0
-0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6
0
-0.4
-0.8
-1.2
IB=0 -1.6 -2.0
0
-1
-2
-3
-4
-5
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR TO MITTER VOLTAGE : VCE (V)
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.1 Grounded emitter propagation characteristics
Fig.2 Grounded emitter output characteristics (I)
Fig.3 Grounded emitter output characteristics (II)
Rev.A
2/4
EMZ2 / UMZ2N / IMZ2A
Transistors
VCE= -5V -3V -1V
DC CURRENT GAIN : hFE
200 500
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
500
Ta=25C
Ta=100C 25C -40C
-1
Ta=25C
DC CURRENT GAIN : hFE
-0.5
200
100
-0.2
100
IC/IB=50
-0.1
20 10
50
50
VCE= -6V -5 -10 -20 -50 -100
-0.05 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -100
-0.2 -0.5 -1
-2
-5 -10 -20
-50 -100
-0.2 -0.5 -1
-2
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Fig.4 DC current gain vs. collector current (I)
Fig.5 DC current gain vs. collector current (II)
Fig.6 Collector-emitter saturation voltage vs. collector current (I)
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
lC/lB=10
COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF)
-1
1000
20
-0.5
TRANSITION FREQUENCY : fT (MHz)
Ta=25C VCE= -12V
Cib
10
500
Ta=25C f=1MHz IE=0A IC=0A
Co b
-0.2
Ta=100C 25C -40C
200
5
-0.1
100
2
-0.05 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -100
50 0.5
1 2 5 10
20
50
100
-0.5
-1
-2
-5
-10
-20
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V)
Fig.7 Collector-emitter saturation voltage vs. collector current (II)
Fig.8 Gain bandwidth product vs. emitter current
Fig.9 Collector output capacitance vs. collector-base voltage Emitter inputcapacitance vs. emitter-base voltage
NPN Tr
50
COLLECTOR CURRENT : IC (mA)
100
VCE=6V
Ta=25C
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
20
10 5
Ta=100C
25C -55C
80
0.50mA mA 0.45 A 0.40m 0.35mA 0.30mA
10
Ta=25C
30A 27A
8
24A 21A
60
0.25mA 0.20mA
6
18A 15A
2
1
40
0.15mA 0.10mA
4
12A 9A
0.5 0.2 0.1 0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
BASE TO EMITTER VOLTAGE : VBE (V)
20
0.05mA IB=0A 0 0.4 0.8 1.2 1.6 2.0
2
6A 3A
0
0 0
4
8
IB=0A 12
16
20
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.10 Grounded emitter propagation characteristics
Fig.11 Grounded emitter output characteristics ( )
Fig.12
Grounded emitter output characteristics ( )
Rev.A
3/4
EMZ2 / UMZ2N / IMZ2A
Transistors
500
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
500
VCE=5V
Ta=25C
0.5
Ta=100C
Ta=25C
DC CURRENT GAIN : hFE
200
VCE=5V 3V 1V
DC CURRENT GAIN : hFE
200
25C -55C
0.2 IC/IB=50 20 10
100
100
0.1 0.05
50
50
0.02
20 10 0.2
20 10 0.2
0.5 1
2
5
10 20
50 100 200
0.5 1
2
5
10 20
50 100 200
0.01 0.2
0.5 1
2
5
10
20
50 100 200
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Fig.13 DC current gain vs. collector current ( )
Fig.14 DC current gain vs. collector current ( )
Fig.15 Collector-emitter saturation voltage vs. collector current
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
0.5
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
IC/IB=10
0.5
TRANSITION FREQUENCY : fT (MHz)
IC/IB=50
500
Ta=25C VCE=6V
0.2 Ta=100C 25C -55C
0.2 0.1 0.05
0.1 0.05
Ta=100C 25C -55C
200
0.02
100
0.02 0.01 0.2 0.5 1 2 5 10 20 50 100
0.01 0.2 0.5 1 2 5 10 20 50 100 200
50 -0.5 -1
-2
-5
-10 -20
-50 -100
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.16 Collector-emitter saturation voltage vs. collector current ( )
Fig.17 Collector-emitter saturation voltage vs. collector current ()
Fig.18 Gain bandwidth product vs. emitter current
BASE COLLECTOR TIME CONSTANT : Cc*rbb' (ps)
COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF)
20
10
Cib
Ta=25C f=1MHz IE=0A IC=0A
200
Ta=25C f=32MHZ VCB=6V
100
5
50
2
Co b
20
1
0.2 0.5 1 2 5 10 20 50
10
-0.2
-0.5
-1
-2
-5
-10
COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V)
EMITTER CURRENT : IE (mA)
Fig.19
Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage
Fig.20 Base-collector time constant vs. emitter current
Rev.A
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of UMZ2N

	To Download UMZ2N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .